Robot gripper, robot grippers, robotic gripper, robotic grippers, robot parallel gripper, robot parallel grippers, robotic parallel gripper, robotic parallel grippers, robot pneumatic gripper, robot pneumatic grippers, robotic pneumatic gripper, robotic pneumatic grippers, robot arm, robot arms, robotic arm, robotic arms, robot end effector, robotic end effector, robot end of arm, robotic end of arm, robot tooling, robotic tooling, robot tool, robot tools, robotic tool and robotic tools depict Collet Robot Grippers of RAD The Robotic Accessories Leader


Home

About Us

	Collision Sensors
	Compliance Devices
	Deburring Tools
	Grippers
	2-Jaw ···
	3-Jaw ···
	Collet ···
	Tool Changers
	Maintenance & Services

Placing an Order
Terms & Conditions
Site Map
eNEWS
Downloads
Contact Us
Employment Opportunities

Home - Products - Grippers - Collet - Product Selection

Key Benefits - General - Collet - Parallel Grippers - RAD Robotic Accessories

RAD's Pneumatic Collet Grippers are designed for the precise picking and placing of parts that are uniform in size. A precision collet is enclosed in a housing that is tapered to conform to the outside diameter of the collet. The collet is linked to a double-acting piston and as the piston actuates, the collet is forced to either "open & extend" or "close & retract."

Note: Collet Grippers are best suited for applications where production parts have tight tolerances since collets are precisely manufactured for a particular part dimension.

ASSUMPTIONS Used to Determine Maximum Payload:

System Pressure = 100 psi (6.9 bar)
Maximum Acceleration/Deceleration = 1G - 386 in/s² (9.8 m/s²)
Part Friction (µ) = 0.25



	Overview
	Contact Us

	Additional Grippers
	2-Jaw
	3-Jaw

Select >	Metric Specifications / English Specifications
Sort >	Model Number	Collet Series	Collet Type	Collet Size I.D.	Collet Size O.D.	Maximum Payload	Usage	Information
	C-8800	5C	Standard or Expanding O.D.	0.25 to 26.97 mm	3.18 to 38.10 mm	147.5 kg	General
	C-8500	1C	Standard	0.25 to 6.35 mm	N/A	5.0 kg	General
	C-8600	3C	Standard	0.25 to 12.70 mm	N/A	15.1 kg	General
	C-8700	5C	Standard	0.25 to 26.97 mm	N/A	18.3 kg	General

If you would like help selecting the gripper model best suited for your specific application please contact RAD at 937.667.5705.

RAD products are also known as robot arm, robot arms, robotic arm, robotic arms, robot end effector, robot end effectors, robotic end effector, robotic end effectors, robot end of arm, robotic end of arm, robot tool, robot tools, robotic tool, robotic tools, robot tooling, robotic tooling, rad, robot accessories and robotic accessories.

RAD Grippers are also known as robot gripper, robot grippers, robotic gripper, robotic grippers, robot parallel gripper, robot parallel grippers, robotic parallel gripper, robotic parallel grippers, robot pneumatic gripper, robot pneumatic grippers, robotic pneumatic gripper and robotic pneumatic grippers.

RAD products can be used on robots, linear actuators, gantry equipment, pick & place machines and other automation equipment.